INDUCTRIX FPV BNF
The perfect beginner FPV drone designed for indoor flying in even the smallest of places, the Blade® Inductrix™ drone is an ultra-micro marvel. You get out-of-the-box FPV performance with a pre-installed 25mW micro FPV system and a 4.3 inch FPV external monitor (monitor available with RTF version ONLY) which can easily be upgraded to FPV goggles. Four specially tuned Electric Ducted Fan rotor systems give this modern quad the appeal of a jet. As a result, performance feels incredibly smooth with far less noise than a conventional propeller rotor system. Durable rotor housings inherently prevent damage whether it’s bumped into walls or falls into the grass. Brilliant LED orientation lights and a sleek body design help keep you going in the right direction. Innovative SAFE® technology with self-leveling makes staying in control easy, even if it’s your first flight.
- Intuitive flight modes that make flying simple
- Fully integrated FPV flight camera on 5.8GHz
- Quiet EDF power system
- Improved motors for better response
- Durable rotor housings prevent damage
- Lightweight and fully-assembled with no building required
- E-flite® 200mAh 45C LiPo flight battery
- E-flite® USB charge
SAFE (Sensor Assisted Flight Envelope) technology is a revolutionary electronic flight envelope protection system. This intuitive technology enables consistently smooth flight and battles windy conditions in multiple modes so you can fly with the ideal level of assistance and protection.
25mw micro FPV system is pre-installed so you can be flying in even the tightest of places immediately after charging the battery
- Fully assembled Blade® Inductrix™ drone
- E-flite® 200mAh 1S 3.7V 25C Li-Po battery
- USB 1S Li-Po charger
Quiet Ducted Fans
Four carefully-tuned electric ducted fans give the Inductrix™ drone smooth performance that produces far less noise compared to normal quads that use traditional propellers for thrust. Improved motors offer more punch when you need it, without sacrificing efficiency. The stealthy result is a machine that’s less intimidating with the appeal of a jet aircraft.
The included E-flite® USB charging unit operates from any convenient 5.0V USB port and can have the included 200mAh 1S 3.7V LiPo flight battery recharged in a matter of minutes.
- BNF: Any 4+ channel transmitter with Spektrum™ DSMX® 2.4GHz technology 5.8GHz compatible FPV headset or FPV monitor
- 4 × AA transmitter batteries
- EFLA111 - Li-Po Cell Voltage Checker
- C24102 - Integy Type II Digital Voltage Checker LiPo Battery
- Venom 0644 - Venom Low Voltage Battery Monitor 2-8S
- EFLB1501S25 - 150mAh 1S 3.7V 25C LiPo Battery
- Vehicle Type: Quadcopter
- Channels: 4
- Build Type: Bind-N-Fly
- Battery Type: 150mAh 3.7V 25C LiPo
- Main Rotor Head Type: Multi-Rotor
- Main Blade Material: Plastic
- Main Motor Type: Brushed
- Approximate Flight Time: 6–8 minutes
- Approximate Assembly Time: No assembly required
- Experience Level: Beginner
Brilliant LED lights are located to provide instant orientation reference. The clear rotor housings keep your view unobstructed and add an unmistakable glow to the airframe.
Brilliant LED orientation lights and a sleek body design make it easy to keep going in the right direction. When combined with SAFE® technology with self-leveling, staying in control is effortless, even if it’s your first time behind the sticks!
Manuals & Support:
- BLH8580 Blade Inductrix BNF Manual – English
- (BLH2208) - Smart Phone Holder mLP TX
- (BLH8501) - Main Control Board: Inductrix FPV
- (BLH8502) - Clockwise Motor, Speed: Inductrix
- (BLH8503) - Counter Clockwise Motor, Speed: Inductrix
- (BLH8504) - Canopy: Inductrix FPV
- (BLH8505) - FPV Camera 25mW w/ Raceband: Inductrix FPV
- (BLH8506) - Prop Set (4), Yellow: Inductrix
- (BLH8706) - Main Frame: Inductrix
- (BLH9011) - FPV Camera: Inductrix 200
- (EFLB2001S45) - 200mAh 1S 3.7V 45C LiPo Battery
- (EFLC1008) - 1S USB Li-Po Charger, 300mA
The new Inductrix FPV provides the freedom of flight in a fully ready-to-fly package as well as an FPV Ready Bind-n-Fly version. No soldering or 3D printing required! Enjoy a world you never knew existed when you are in the pilot's seat of the Inductrix FPV!
The Inductrix® FPV from Blade® builds on the wildly popular platform and transforms it into an incredible FPV machine right out of the box. With its integrated 25mW video transmitter, FPV camera, high performance motors and large 200mAh battery, the Inductrix FPV is capable of flying in the smallest of places with ease. Enjoy the view as SAFE® technology makes flying simple and while the ducted propeller design allows you to bounce of walls and objects without crashing! Tthe Inductrix FPV comes out of the box with everything installed on the aircraft itself. All you need to get is a FPV monitor to completes the entire FPV experience! If you are looking for that immersive goggle experience, the headset adaptor can be purchased separately as well!